Stable electrochemical measurements of platinum screen-printed electrodes modified with vertical ZnO nanorods for bacterial detection
The study is aimed at investigating the stability of electrochemical and biosensing properties of ZnO nanorod-based platinum screen-printed electrodes (SPEs) applied for detection of bacterial pathogens. The platinum SPEs were designed and patterned according to standard photolithography and lift-of...
Lưu vào:
| Tác giả chính: | |
|---|---|
| Đồng tác giả: | |
| Nhà xuất bản: |
2019
|
| Truy cập trực tuyến: | https://dlib.phenikaa-uni.edu.vn/handle/PNK/313 |
| Từ khóa: |
Thêm từ khóa
Không có từ khóa, Hãy là người đầu tiên đánh dấu biểu ghi này!
|
| Tóm tắt: | The study is aimed at investigating the stability of electrochemical and biosensing properties of ZnO nanorod-based platinum screen-printed electrodes (SPEs) applied for detection of bacterial pathogens. The platinum SPEs were designed and patterned according to standard photolithography and lift-off process on a silicon wafer. ZnO nanorods (NRs) were grown on the platinum working electrode by the hydrothermal method, whereas Salmonella polyclonal antibodies were selected and immobilized onto ZnO NR surface via a crosslinking process. Morphological and structural characteristics of ZnO NRs were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The results showed that the ZnO NRs were grown vertically on platinum electrodes with a diameter around 20-200 nm and a length of 5-7 μm. These modified electrodes were applied for detection of Salmonella enteritidis at a concentration of 103 cfu/mL by electrochemical measurements including cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The ZnO NR-modified platinum electrodes could detect Salmonella bacteria well with stable measurements, and the signal to noise ratio was much higher than that of 3 : 1. This study indicated that ZnO NR-modified platinum SPEs could be potential for the development of biochips for electrochemical detection of bacterial pathogens. |
|---|