Disturbance Observer-Based Robust Model Predictive Control for a Voltage Sensorless Grid-Connected Inverter With an LCL Filter
This paper proposes a disturbance observer-based robust model predictive control (MPC) for a voltage sensorless grid-connected inverter with an inductive-capacitive-inductive (LCL) filter. A full-state estimator and a grid voltage observer are designed to reduce the number of sensors. A lumped distu...
Lưu vào:
| Tác giả chính: | , , , |
|---|---|
| Định dạng: | Bài trích |
| Ngôn ngữ: | eng |
| Nhà xuất bản: |
IEEE Access
2021
|
| Chủ đề: | |
| Truy cập trực tuyến: | https://ieeexplore.ieee.org/document/9507463 https://dlib.phenikaa-uni.edu.vn/handle/PNK/2859 |
| Từ khóa: |
Thêm từ khóa
Không có từ khóa, Hãy là người đầu tiên đánh dấu biểu ghi này!
|
| Tóm tắt: | This paper proposes a disturbance observer-based robust model predictive control (MPC) for a voltage sensorless grid-connected inverter with an inductive-capacitive-inductive (LCL) filter. A full-state estimator and a grid voltage observer are designed to reduce the number of sensors. A lumped disturbance observer, considering the parameter mismatch along with the grid impedance variation, is also designed to eliminate the steady-state error. A cost function, which consists of the error state and control input, is employed in the MPC design. Based on the Lyapunov stability, the full-state observer, voltage estimation, lumped disturbance observer, and the robust controller gains are obtained by solving an optimization problem based on linear matrix inequality (LMI). A frequency response analysis of the entire system is conducted to verify the reference tracking and disturbance rejection outcomes. As a result, the state and grid voltage observer outcomes converge to the actual values as rapidly as possible. The effectiveness of the proposed control method is demonstrated in comparison with the proportional-integral (PI) approach and with a controller recently proposed in the literature. Simulation and experimental results are presented to verify the effectiveness of the proposed method under LCL parameter uncertainties and grid impedance variations. |
|---|